User Tools

Site Tools


engine:fueltanks

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
engine:fueltanks [2024/03/28 06:48]
47.128.57.27 old revision restored (2023/10/25 15:04)
engine:fueltanks [2024/04/27 01:18] (current)
114.119.136.99 old revision restored (2023/10/18 08:26)
Line 3: Line 3:
 ==== Fuel Pressure ==== ==== Fuel Pressure ====
  
-Fuel pressure should be read before the adjustable regulator+Fuel pressure should be read before the adjustable regulator
 The fuel pressure with the pumps running but engine off should be 4 to 5psi. When started, it is standard for the pressure of the tank to fall to 1psi (but should read less than 3.5psi.) The fuel pressure with the pumps running but engine off should be 4 to 5psi. When started, it is standard for the pressure of the tank to fall to 1psi (but should read less than 3.5psi.)
  
Line 14: Line 13:
  
  
-Although it is rumored that you must remove the engine to remove the fuel tanks, this is not so. You will need to unbolt the seatbelts and the brackets for the gas struts, but the fuel tanks can be removed with the engine in place.+It is also rumored that in order to remove the driver side tank (US)/ passenger side tank (UK) you might need to actually pull the motor.
engine/fueltanks.1711608528.txt.gz · Last modified: 2024/03/28 06:48 by 47.128.57.27